| |
|
Home > Products
Monitoring System
SeCaP™ PM Application Software and SeCaP™ WCM Application
Software
It is software driven …
In
a checklist for basic requirements for modern instrumentation you will
find the ability to present measurement data in a user-friendly form,
digitally or analogous, and as real time as possible. This second requirement
certainly goes for dynamic processes. A third basic requirement would
be to offer the necessary accuracy. A fourth, or as an alternative
to
the first requirement, measurement data must be possible to integrate
into processes and into higher levels in a system hierarchy.
To meet these basic requirements it is necessary to deploy state-of-the
art measurement technology, such as the SeCaP™ technology. However,
accurate and fast "raw" measurement data is less and less sufficient.
Modern instrumentation at its best also "models" measurement
data to make the operator maximally informed. This modelling is software
driven. Through the modelling of measurement data the operator can be
offered additional valuable information such as statistics, trends, threshold
warnings, event correlation to name a few. The SeCaP™ technology
comes with such software driven modelling of measurement data.
To put it simple, Sentech customers can use the SeCaP™ technology
in two modes:
-
Measurement System mode, consisting of a sensor / probe device to
which is added a Monitoring System that a.o. does the measurement
data modelling which is software driven
-
Meter mode, consisting of a sensor / probe device with additional
interfaces, protection devices etc. but without measurement data modelling,
i.e. without software.
Technical description
SeCaP™ PM Application Software is a bundled software package that
offers functionality for users of Sentech's SeCaP™ Profile Measurement
system. Functions include:
| User friendly Windows-based interface for users,
operators, sysadmins and others |
Feature rich configuring of set-up, to reflect
field specifics and well specifics |
| Recording of time series of measurement data |
Configurable analysis and presentation of
measurement data |
| Tabular and graphical presentation |
| Replay of recorded data, for drill-down analysis |
| Extensive on-line manual |
| Open libraries for localization (language, field
specifics, well specifics, etc.) |
There are no external system requirements for the SeCaP™ PM Application
Software since it is executed on a Computer System supplied as a part
of the Monitoring System.
SeCaP™ WCM Application Software is a bundled software package that
offers functionality for users of Sentech's SeCaP™ Water Cut Measurement
System. Functions include:
Friendly Windows-based interface for users, operators, sysadmins
and others |
Feature rich configuring of set-up, to reflect field specifics
and well specifics |
| Recording of time series of measurement data |
|
HOME | PRODUCTS | TECHNOLOGY | ABOUT SENTECH | CONTACT US 